Menu
Cart 0

Full River DC105-12 - 12V 105Ah AGM DC Battery

  • $ 282.00 USD


Contact onlinesales@obmghk.com for pricing and shipping restrictions.

When it comes to Deep Cycle batteries, the details matter. Construction, plate chemistry, and craftsmanship all have to be in sync to get the longest life in the most demanding applications. Because of the environments where Fullriver DC AGM batteries are used, we work closely with our customers to ensure our construction standards are geared to meet your needs. We use more lead in creating stronger connections between cells, heavier plates to increase our reserve capacity, and have formulated our batteries to maximize life cycles.

By taking these steps, the engineers and factory for Fullriver DC Series batteries have matched the highest standard for Deep Cycle VRLA batteries on the market. This has allowed us to craft out batteries to ensure they maintain their performance levels in the highest vibration and deepest discharge applications.

Whether you need deep cycling power for your Boat or RV; for your Solar and Wind power generator system; a consistent ride from your Electric Vehicles or Golf Cars; or a long lasting battery pack in your Floor Cleaning machine, Aerial Work Platforms or Pallet Truck, we have a battery that has been tested and proven the best in your Deep Cycle application.

And because it comes in a fully sealed, maintenance-free, corrosion-free package, Fullriver DC Series AGM batteries are an investment in making sure your battery pack enhances the quality of your machines. Fullriver DC Series AGM - The Battery that Makes Your Machine Better

DC105-12 27 12V
  • 175 @ 25 Amps
  • 43 @ 75 Amps
  • 86 @ 5 HR
  • 105 @ 20 HR
680

 

Cycling Capacity
20 hour rate 105 Amp Hours
Reserve Capacity
@ 25 Amps 175 minutes @ 75 Amps 43 minutes
Mechanical Specifications
Group Size 27
Terminal Type M8 (w/ TP08 Brass AP Included)
Total Height 8.46" (215 mm)
Height 8.31" (211 mm)
Width 6.65" (169 mm)
Length 12.09" (307 mm)
Weight 67.0 lbs (30.4 kg)
Case Type ABS Plastic - Flame Res Rating UL94-HB
Discharge Table (Constant Current)
Time Amps Rate
20 hr 5.3 0.05 CA
10 hr 9.5 0.1 CA
8 hr 11.4 0.13 CA
5 hr 17.2 0.25 CA
3 hr 23.7 0.33 CA
2 hr 31.6 0.5 CA
1 hr 59.6 1 CA
Electrical Specifications
Nominal Voltage 12 Volt
Capacity @ 100 hour rate 115 AH
Capacity @ 20 hour rate 105 AH
Capacity @ 10 hour rate 95 AH
Capacity @ 5 hour rate 86 AH
CCA 680
CA or MCA 820
Short Circuit Current 2590 Amps
Internal Resistance 4m Ω
Charge Voltages
Battery Voltages
Charge Stage 12V 24V 36V 48V
Bulk 14.7 V 29.4 V 44.1 V 58.8 V
Absorption 14.7 V 29.4 V 44.1 V 58.8 V
Float 13.6 V 27.2 V 40.8 V 54.6 V
TC Factor: -4mV/°C/cell
Temperature Range Specifications
Condition Recommended Maximum
Storage -15°C to 50°C -40°C to 71°C
Operation -15°C to 40°C -40°C to 71°C
Charge with TC -15°C to 50°C -40°C to 71°C
Charge without TC 0°C to 40°C -15°C to 50°C
Terminal Torque Specifications
Terminal Type ft-lbs in-lbs Nm
AP | DT (AP) | M6 | M6M (stud) | TP07 (AP) | TP08 (AP) 4.2 - 6.0 50-70 5.6 - 7.9
FR45 6.0 - 7.5 70-90 7.9 - 10.1
M8 7.1 - 8.0 85-95 9.6 - 10.7
DT (stud) | M10M (stud) 9.2 - 10.4 110-125 12.2 - 14.0

Brochure
Charging Instructions
Installation Manual


We Also Recommend